The OWC Mercury Pro LTO enables you to archive data seamlessly in your workflow via the included Thunderbolt 3 cable connected to your Mac or PC. You can also optionally enhance your workflow by:
Adding up to a 16TB SATA/SAS SSD to the 2.5/3.5-inch drive expansion bay for extra storage and backup capacity
Connecting a USB 3.0, USB-C, or Thunderbolt 3 device to the Mercury Pro LTO's second Thunderbolt 3 port for added functionalities
Adding a second display with up to 8K resolution via the DisplayPort 1.4 interface
Keeping your notebook charged with the 85W Thunderbolt 3 port
In the Box
1 x OWC Mercury Pro LTO LTO-8 Thunderbolt Tape Drive
IBM LTO Ultrium 8 LTO-8: up to 300MB/s native (750MB/s compressed) LTO-8 Media Supported LTO-7 Media Supported
Mechanisms Supported
2.5 inch SATA drives 3.5 inch SATA drives 2.5 inch SAS drives 3.5 inch SAS drives
Display Support
Up to one 8K display @ 60Hz - or one 4K display @ 120Hz - or one 5K display @ 60Hz - or two 4K displays @ 60Hz - or one 4K display @ 60Hz and one 4K display @ 30Hz - or one 4K display @ 60Hz - or one 4K display @ 30Hz
Display Support by Port
Thunderbolt 3: Up to 5K @ 60Hz via a native Thunderbolt 3 display or 4K @ 60Hz via a Thunderbolt display or a USB-C display adapter DisplayPort 1.4: Up to 8K @ 60Hz or 4K @ 120Hz
Bootable
No
Chipset
Thunderbolt: intel JHL7440
Data Transfer Rate
Thunderbolt 3: up to 40 Gb/s (or 5000 MB/s)
Host Port Requirements
Thunderbolt 3
AC Input
90-264V - 47-63Hz - 1.0A-1.8A
DC Output
+12V - 16.7A
Wattage
200W
Device Ports
2 x Thunderbolt 3 (USB-C) ports 1 x DisplayPort port
WARNING: This product may expose you to chemicals which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.