The Neutrik NC7FXX is an advanced 7-pole female cable connector featuring a robust nickel plating and silver contacts, epitomizing the evolution of the globally recognized standard in XLR cable connectors. Built for reliability and ease of use, its unique design, including a cage-style female contact and improved solid metal latch, ensures excellent contact integrity and secure handling. The sleek zinc diecast shell ensures durability, while its ergonomic design facilitates convenient assembly and strain relief for optimum performance in various audio, video, and industrial scenarios.
Features
Unique cage design for low contact resistance and high integrity
Improved solder barrier to avoid solder flow into contact areas
Enhanced solid metal latch for easier handling
Additional ground spring contacts for superior shell ground continuity
Improved chuck type strain relief for higher pull-out force
Polyurethane boot for excellent cable bending stress protection
Available with colored rings and boots for easy coding and identification
Rugged zinc diecast shell with well-protected internal thread
Neutrik Cable end XX series 7 pin female - nickel/silver
Manufacturer
Neutrik
Technical Information
Connection Type
XLR
Gender
Female
Electrical
Capacitance between contacts
≤ 9 pF
Contact resistance
≤ 3 mΩ
Dielectric strength
1.5 kVdc
Insulation resistance
> 10 GΩ (initial)
Rated current per contact
5 A
Rated voltage
< 50 V
Mechanical
Cable O.D.
3.5 - 8.0 mm
Insertion force
≤ 20 N
Withdrawal force
≤ 20 N
Lifetime
> 1000 mating cycles
Wiresize
max. 1.0 mm², max. 18 AWG
Wiring
Solder contacts
Locking device
Latch lock
Material
Boot
Polyurethane
Contact plating
2 µm Ag over 2 µm Ni
Contacts
Brass (CuZn39Pb3)
Insert
Polyamide (PA 6.6 30% GR)
Locking element
Zinc diecast (ZnAl4Cu1) / Ck 67 (spring)
Shell
Zinc diecast (ZnAl4Cu1)
Shell plating
Nickel
Strain relief
Polyacetal (POM)
Environmental
Flammability
UL 94 HB
Standard compliance
IEC 61076-2-103
Protection class
IP 40
Solderability
Complies with IEC 68-2-20
Temperature range
-30 °C to +80 °C
Accessories
BTXX
Speed boot assembly tool to press XX boot onto shell.
BXX-*
Colored bushings
BXX-CR
Black bushing with clear coding ring
BXX-14
Large bushing with chuck type strain relief (8 mm - 10 mm cable O.D.)
HTXP
Hand tool for tightening the bushing of the XLR XX series, Plug PX series and etherCON CAT6 series
XXR-*
Colored coding rings. Color ring can be changed without unsoldering insert
XXCR
Transparent coding ring which allows an individual customized labeling, branding, coding etc.
HTX
Hand tool for tightening the bushing of the XLR X, XCC, FX-SPEC series and etherCON cable connector carrier series as well as the XLR XX and etherCON CAT6 series
WARNING: This product may expose you to chemicals which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
If you want to share this elsewhere, you can click the link below to copy it