The Neutrik NC7FXX-BAG is a state-of-the-art 7-pole female cable connector that sets a new standard in the world of XLR connections with its enhanced features and robust build. Designed for reliability and ease of assembly, this connector boasts a sleek, ergonomic design that incorporates a rugged zinc diecast shell for long-lasting durability. The unique cage design and solder barrier of the female contacts ensure low contact resistance and high integrity, while the improved strain relief increases the pull-out force, simplifying installation. Ideal for both professional audio and lighting applications, it offers high protection against cable bending stresses and features color-coded rings and boots for easy identification and customization.
Features
7-pole female XLR connector with a black metal housing and silver contacts.
Unique cage design for low contact resistance and high integrity.
Improved solid metal latch is larger and easier to handle.
Additional ground spring contacts for better shell ground continuity.
Enhanced chuck type strain relief for higher pull-out force and easier assembly.
Boot with polyurethane gland for high protection against cable bending stresses.
Sleek and ergonomic design; rugged zinc diecast shell for durability.
Available with colored rings and boots for coding and identification.
Neutrik Cable end XX series 7 pin female - black/silver
Connection Type
XLR
Gender
Female
Electrical
Capacitance between contacts
9 pF
Contact resistance
3 m
Dielectric strength
1.5 kVdc
Insulation resistance
> 10 G (initial)
Rated current per contact
5 A
Rated voltage
< 50 V
Mechanical
Cable O.D.
3.5 - 8.0 mm
Insertion force
20 N
Withdrawal force
20 N
Lifetime
> 1000 mating cycles
Wiresize
max. 1.0 mm2 / max. 18 AWG
Wiring
Solder contacts
Locking device
Latch lock
Material
Boot
Polyurethan
Contact plating
2 m Ag over 2 m Ni
Contacts
Brass (CuZn39Pb3)
Insert
Polyamide (PA 6.6 30% GR)
Locking element
Zinc diecast (ZnAl4Cu1) / Ck 67 (spring)
Locking element plating
Nickel
Shell
Zinc diecast (ZnAl4Cu1)
Shell coating
Black KTL
Strain relief
Polyacetal (POM)
Environmental
Flammability
UL 94 HB
Standard compliance
IEC 61076-2-103
Protection class
IP 40
Solderability
Complies with IEC 68-2-20
Temperature range
-30 deg C to +80 deg C
Accessories
BTXX
Speed boot assembly tool to press XX boot onto shell.
BXX-*
Colored bushings
BXX-14
Large bushing with chuck type strain relief (8 mm - 10 mm cable O.D.).
HTXP
Hand tool for tightening the bushing of the XLR XX series, Plug PX series and etherCON CAT6 series.
XXR-*
Colored coding rings. Color ring can be changed without unsoldering insert.
XXCR
Transparent coding ring for customized labeling, branding, coding.
HTX
Hand tool for tightening the bushing of the XLR X, XCC, FX-SPEC series and etherCON cable connector carrier series as well as the XLR XX and etherCON CAT6 series.
WARNING: This product may expose you to chemicals which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
If you want to share this elsewhere, you can click the link below to copy it