The NC5FXX is an innovative 5-pole female cable connector from Neutrik that sets a new standard in XLR connections with its sleek, ergonomic design and cutting-edge features. Tailored for versatility and reliability, this connector boasts a rugged zinc diecast shell and is designed with a unique cage for low contact resistance, enhanced strain relief, and solder barriers to ensure high contact integrity. Ideal for a range of audio applications, the NC5FXX is crafted for 1000 mating cycles, promising long-lasting performance and superior durability in both professional and industrial settings.
Features
Unique cage design of female contact for low contact resistance and high integrity
Female contact with solder barrier to prevent solder running into contact mating area
Improved solid metal latch, larger and easier to handle
Additional ground spring contacts for better shell ground continuity
Enhanced chuck type strain relief for higher pull-out force and easier assembly
Boot with polyurethane gland for high protection against cable bending stresses
Available colored rings and boots for coding or identification
Rugged zinc diecast shell, long-lasting and dependable
Neutrik Cable end XX series 5 pin female - nickel/silver
Connection Type
XLR
Gender
Female
Dimensions
Width
_in
Height
_in
Length
_in
Weight
_lb
Electrical
Capacitance between contacts
≤ 7 pF
Contact resistance
≤ 3 mΩ
Dielectric strength
1.5 kVdc
Insulation resistance
> 10 GΩ (initial)
Rated current per contact
7.5 A
Rated voltage
< 50 V
Mechanical
Cable O.D.
3.5 - 8.0 mm
Insertion force
≤ 20 N
Withdrawal force
≤ 20 N
Lifetime
> 1000 mating cycles
Wiresize
max. 1.0 mm² / max. 18 AWG
Wiring
Solder contacts
Locking device
Latch lock
Material
Boot
Polyurethan
Contact plating
2 µm Ag over 2 µm Ni
Contacts
Brass (CuZn39Pb3)
Insert
Polyamide (PA66)
Locking element
Zinc diecast (ZnAl4Cu1) / Ck 67 (spring)
Locking element plating
Nickel
Shell
Zinc diecast (ZnAl4Cu1)
Shell plating
Nickel
Strain relief
Polyacetal (POM)
Environmental
Flammability
UL 94 V-0
Standard compliance
IEC 61076-2-103
Protection class
IP 40
Solderability
Complies with IEC 68-2-20
Temperature range
-30 °C to +80 °C
Accessories
BTXX
Speed boot assembly tool to press XX boot onto shell.
BXX-*
Colored bushings
BXX-CR
Black bushing with clear coding ring
BXX-14
Large bushing with chuck type strain relief (8 mm - 10 mm cable O.D.).
HTXP
Hand tool for tightening the bushing of the XLR XX series, Plug PX series and etherCON CAT6 series.
XXR-*
Colored coding rings. Color ring can be changed without unsoldering insert.
XXCR
Transparent coding ring for customized labeling, branding, coding etc.
HTX
Hand tool for tightening the bushing of the XLR X, XCC, FX-SPEC series and etherCON cable connector carrier series as well as the XLR XX and etherCON CAT6 series.
WARNING: This product may expose you to chemicals which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
If you want to share this elsewhere, you can click the link below to copy it