The NC4MXX-BAG is a premier 4-pole male cable connector that sets the standard for reliability and ease of assembly with its robust design and innovative features. Designed for demanding audio applications, this next-generation XLR connector offers an improved locking recess and a more durable zinc diecast shell, making it not only long-lasting but also a secure choice for any professional setup. Its refined chuck-type strain relief delivers increased pull-out force, coupled with a polyurethane boot that provides excellent protection against cable bending stresses. Color-coded rings and boots allow for easy identification and customization, ensuring the NC4MXX-BAG remains as versatile as it is dependable.
Features
4-pole male connector with black metal housing and silver contacts
Improved locking recess design for enhanced security
Durable zinc diecast shell for longevity
Advanced chuck-type strain relief for higher pull-out force
Neutrik Cable end XX series 4 pin male - black/silver
Model
NC4MXX-BAG
Manufacturer
Neutrik
Electrical
Connection Type
XLR
Gender
Male
Capacitance between contacts
≤ 7 pF
Contact resistance
≤ 3 mΩ
Dielectric strength
1.5 kVdc
Insulation resistance
> 10 GΩ (initial)
Rated current per contact
10 A
Rated voltage
< 50 V
Mechanical
Cable O.D.
3.5 - 8.0 mm
Insertion force
≤ 20 N
Withdrawal force
≤ 20 N
Lifetime
> 1000 mating cycles
Wiresize max.
1.5 mm² / 16 AWG
Wiring
Solder contacts
Locking device
Latch lock
Material
Boot
Polyurethane
Contact plating
2 µm Ag over 2 µm Ni
Contacts
Brass (CuZn39Pb3)
Insert
Polyamide (PA66)
Locking element
Zinc diecast (ZnAl4Cu1)
Shell
Zinc diecast (ZnAl4Cu1)
Shell coating
Black KTL
Strain relief
Polyacetal (POM)
Environmental
Flammability
UL 94 V-0
Standard compliance
IEC 61076-2-103
Protection class
IP 40
Solderability
Complies with IEC 68-2-20
Temperature range
-30 °C to +80 °C
Accessories
BTXX
Speed boot assembly tool to press XX boot onto shell
BXX-*
Colored bushings
BXX-CR
Black bushing with clear coding ring
BXX-14
Large bushing with chuck type strain relief (8 mm - 10 mm cable O.D.)
HTXP
Hand tool for tightening the bushing of the XLR XX series, Plug PX series, and etherCON CAT6 series
XXR-*
Colored coding rings. Color ring can be changed without unsoldering insert
XXCR
Transparent coding ring for individual customization
HTX
Hand tool for tightening the bushing of the XLR X, XCC, FX-SPEC series and etherCON cable connector carrier series as well as the XLR XX and etherCON CAT6 series
WARNING: This product may expose you to chemicals which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
If you want to share this elsewhere, you can click the link below to copy it