Introducing the NBTB75IFI4, Neutrik's high-performance BNC cable jack for panel mount designed explicitly for 75 Ω connections, perfect for serial and digital HD signals. Crafted from machined brass, this connector offers a durable, non-abrasive contact that stands up to repeated use with over 1000 mating cycles. Its gold-plated center contact ensures optimal conductivity, while the isolated panel mount design prevents grounding issues and reduces common-mode interference across shared panel ground potentials. Compatible with various cables such as Belden and Draka, the NBTB75IFI4 promises a robust and reliable connection for professional audiovisual applications.
Features
Gold plated center contact for optimal conductivity
True 75 Ω design for serial and digital (HD) signals
Isolated panel mount to prevent grounding problems
Durable brass construction with Optalloy® shell plating
Neutrik BNC Jack Panel Mount Isolated 75 Ohm -CS/-PDC
Connection Type
BNC 75 Ω
Gender
Female
Electrical
Contact Resistance (Inner)
≤ 3 mΩ
Contact Resistance (Outer)
≤ 2 mΩ
Dielectric Strength
0.75 kVdc
Impedance
75 Ω
Insulation Resistance
> 5 GΩ
Rated Voltage
< 50 V
VSWR
≤ 1.050/>32 dB up to 1 GHz; ≤ 1.065/>30 dB up to 2 GHz; ≤ 1.100/>26 dB up to 3 GHz
Mechanical
Cable O.D.
4.0 - 7.7 mm
Cable Retention
> 30 N (Center)
Crimp Size (Shield)
4.06 mm Hex acc. MIL22520/5-39(B)
Crimp Size (Pin)
1.6 mm Square acc. IEC 60803
Insertion Force
< 25 N
Lifetime
> 1000 mating cycles
Locking Device
Bayonett
Cable Anchoring
Jacket crimping
Material
Contacts
Brass (CuZn35Pb2), 0.2 µm AuCo (Center contact)
Insert
PTFE
Shell
Brass (CuZn39Pb3)
Shell Plating
Optalloy®
Environmental
Temperature Range
-30 °C to +85 °C
Contact Crimpability
Complies with IEC 60803 and IEC 60352-2
Accessories
DIE-BNC-CS
Crimp tool die for HX-BNC; Pin crimping: 1.6 mm; Shield and jacket: HEX crimp 4.06 mm (A), 7.01 mm (B)
DIE-R-BNC-PDC
Crimp tool die for HX-R-BNC; Pin crimping: 1.60 mm; Shield and jacket: HEX crimp 6.47 mm (A), 4.53 mm (B), 4.06 mm (C)
HX-BNC
Crimp tool, frame; ATTENTION: Suitable dies are DIE-BNC-*
HX-R-BNC
Crimp tool, frame; ATTENTION: Suitable dies are DIE-R-* and DIE-R-BNC*
Additional Information
BNC Cable Jack for Panel Mount, Isolated
Neutrik's BNC cable jacks for panel mount offer a true 75 Ω design for serial and digital (HD) signals. The machined brass connector body provides an extremely rugged and non-abrasive connection over long term use.
Gold plated center contact, True 75 Ω design meets the stringent HD requirements, Isolated panel mount (solves potential grounding problems and prevents common-mode influence with other connections conducted over the same panel ground potential)
WARNING: This product may expose you to chemicals which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
If you want to share this elsewhere, you can click the link below to copy it
