The Belden CAT6+ Shielded Plenum Data Cable (Belden 2413FS) is a high-performance F/UTP plenum cable built for demanding network, control, and AV installations where signal integrity, fire safety, and installation convenience all matter. Featuring bonded pairs, a central X-spline separator, and a full-coverage foil shield, it minimizes crosstalk and interference, while the low-smoke CMP Flamarrest jacket and wide operating temperature range make it suitable for professional facilities, commercial buildings, and mission-critical infrastructure.
Features
Cat6+ F/UTP plenum cable (Belden 2413FS) with bonded pairs and central X-spline separator for excellent crosstalk performance
CMP Flamarrest low-smoke PVC jacket rated to NFPA 262 and UL 910 for environmental air spaces
23 AWG solid bare copper conductors; 100% aluminum/poly laminate shield with 24 AWG drain wire
0.285-inch diameter; max 25 lb pulling tension; UL Verified Cat6; NEC/CEC CMP compliant
1000-foot pull box (approx. 49 lb); operating range -4°F to 167°F; non-gel dry core construction
In the Box
1 x 1000 ft reel of Belden 2413FS CAT6+ Shielded Plenum Data Cable, black
Plenum-rated, shielded data cable for high-performance network installations
Manufacturer Part Number
2413FS 0101000
Non-Plenum Companion Part Number
2412FS
Length
1000 ft
Color
Black
Plenum Rated
Yes
Website
Belden
Performance & Features
Crosstalk Control
Central spline separates twisted pairs to keep pair geometry stable and enhance crosstalk performance
Balanced Transmission
Engineered for improved signal balance to support simultaneous parallel transmission protocols
Performance Assurance
Designed to meet or exceed Category 6 requirements for insertion loss, crosstalk, and overall link stability to support high network uptime and headroom
Installation Durability
Bonded-pair construction tolerates higher pull forces and tighter bend radii during installation
Outdoor / OSP Convenience
Dry-core outside plant and indoor/outdoor plenum versions avoid messy gels, tapes, or powders for easier handling
Telecommunications Standards
Category 6 - TIA 568.C.2; UL verified to Category 6
Conductors
Conductor Gauge
23 AWG
Number of Pairs
4 twisted pairs
Conductor Stranding
Solid
Conductor Material
Bare copper (BC)
Insulation & Separators
Insulation Material
Fluorinated Ethylene Propylene (FEP)
Pair Separator / Fillers
Patented central X-spline to maintain pair spacing
Cable Separator Material
Polyester tape
Shielding
Shield Type
Overall foil shield
Shield Material
Polyester plus aluminum/polyester bi-laminate
Shield Coverage
100%
Drain Wire
24 AWG, solid tinned copper
Jacket & Physical
Outer Jacket Material
Flamarrest® low-smoke PVC
Outer Jacket Nominal Diameter
0.285 in (7.24 mm)
Overall Cable Diameter (Nominal)
0.285 in (7.24 mm)
Ripcord
No
Bulk Cable Weight
49 lb per 1000 ft
Mechanical Installation
Maximum Recommended Pulling Tension
25 lb
Minimum Bend Radius (Installed)
1 in (minor axis)
Minimum Bend Radius During Installation
3 in
Environmental
Storage Temperature Range
-20°C to +75°C
Installation Temperature Range
+5°C to +50°C
Operating Temperature Range
-20°C to +75°C
Compliance & Ratings
NEC / UL Listing
Article 800, CMP
CEC / c(UL) Rating
CMP
UL / Flame Tests
NFPA 262, UL 910 (Plenum), FT6, IEC 60332-1-2
California Proposition 65
WARNING: This product may expose you to chemicals known to the State of California to cause cancer. For more information, visit www.P65Warnings.ca.gov.
WARNING: This product may expose you to chemicals which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
If you want to share this elsewhere, you can click the link below to copy it